Regulatory Requirements, Important Notices, Agreements and Warranties
Administrators Guide
iii
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux appareils
numériques de la classe B prescrites dans le Réglement sur le
brouillage radioélectrique édicté par le Ministère des
Communications du Canada.
IEC/EN Notice
This product conforms to the requirements of IEC950 and
EN60950.
This product conforms to requirements of EN55022 for Class A
equipment or EN55022 for Class B equipment (refer to “Terminal
Requirements Compliance”).
Compaq Evo Thin Client T20 and Compaq T1010
Windows Based Terminals
For use with External Power Supply DVE Model DSA-0301-05
or Potrans Model UP01811050A or certified equivalent model
supplied by the manufacturer, rated minimum 5V/4A.
Noise Suppressor
A noise suppressor (ferrite bead) must be installed on the network
cable of your terminal. This installation is necessary to maintain
compliance with U.S. FCC B limits and European CISPR B
EN55022 Class B limits. The noise suppressor is supplied by the
manufacturer and is packed in your terminal’s shipping carton.
Cable Notice
The use of shielded I/O cables is required when connecting this
equipment to any and all optional peripheral or host devices.
Failure to do so may cause interference and violate FCC and
international regulations for electromagnetic interference.
250091-001.book Page iii Friday, July 13, 2001 9:26 AM
