manualshive.com logo in svg

HP Compaq dc7800 MT, Technical Reference Manual, Page: 23 / 102

Share
Download
HP Compaq dc7800 MT Technical Reference Manual Download Page 23

Technical Reference Guide

www.hp.com

2-7

System Overview

2.3.2 Chipset

The Intel Q35 Express chipset consists of a Graphics Memory Controller Hub (GMCH) and an 
enhanced I/O controller hub (ICH9-DO). Table 2-3 compares the functions provided by the 
chipsets.

The I/O controller hub (ICH9-DO) features Intel vPro, which includes Active Management 
Technology (AMT). AMT is a hardware/firmware solution that operates on auxiliary power to 
allow 24/7 support of network alerting and management of the unit without regard to the power 
state or operating system. AMT capabilities include:

■

System asset recovery (hardware and software configuration data)

■

OS-independent system wellness and healing

■

Software (virus) protection/management

Table 2-3

Chipset Components and Functionality

Components

Function

Q35 GMCH

Intel Graphics Media Accelerator 3100 (integrated graphics controller)
PCIe x16 graphics interface (SFF and CMT only)
SDRAM controller supporting unbuffered, non-ECC PC2-6400 DDR2 

DIMMs or SODIMMs
800-, 1066-, or 1333-MHz FSB

82801 ICH9-DO

PCI 2.3 bus I/F
PCI Express x1
LPC bus I/F
SMBus I/F
SATA I/F
HD audio interface
RTC/CMOS
IRQ controller
Power management logic
USB 1.1/2.0 controllers supporting 12 ports 

(these systems provide 8 external, 2 internal)

Gigabit Ethernet controller

Summary of Contents for Compaq dc7800 MT







































































































Reviews:

No comments