manualshive.com logo in svg

HP Compaq dc7800 MT, Technical Reference Manual, Page: 22 / 102

Share
Download
HP Compaq dc7800 MT Technical Reference Manual Download Page 22

2-6

www.hp.com

Technical Reference Guide

System Overview

2.3.1 Intel Processor Support

The models covered in this guide are designed to support the following processor types:

■

Intel Celeron: energy-efficient single-core performance 

■

Intel Pentium Dual-Core: Dual core performance

■

Intel Core2 Duo: energy-efficient dual-core performance

■

Intel Core2 Quad: energy efficient quad-core design

These processors are backward-compatible with software written for earlier x86 microprocessors 
and include streaming SIMD extensions (SSE, SSE2, and SSE3) for enhancing 3D graphics and 
speech processing performance. 

The system board includes a zero-insertion-force (ZIF) Socket-T designed for mounting an 
LGA775-type processor package.

CAUTION: 

The USDT form factor can support a processor rated up to 65 watts. The SFF and CMT form 

factors can support a processor rated up to 95 watts. Exceeding these limits can result in system damage 

and lost data.

✎

The processor heatsink/fan assembly mounting differs between form factors. Always use the 
same assembly or one of the same type when replacing the processor. Refer to the applicable 
Service Reference Guide for detailed removal and replacement procedures of the heatsink/fan 
assembly and the processor.

Summary of Contents for Compaq dc7800 MT







































































































Reviews:

No comments