manualshive.com logo in svg

HP Compaq 436, Maintenance And Service Manual, Page: 24 / 125

Share
Download
HP Compaq 436 Maintenance And Service Manual Download Page 24

Item

Component

Description

(9)

Hard drive light

●

Blinking white: The hard drive is being accessed.

●

Off: The hard drive is idle.

(10)

Power light

●

White: The computer is on.

●

Blinking white: The computer is in the Sleep state.

●

Off: The computer is off or in Hibernation.

Right side

Item

Component

Description

(1)

Optical drive (select models only)

Reads and writes to an optical disc.

(2)

Optical drive light

●

On: The optical drive is in use.

●

Off: The optical drive is idle.

(3)

USB ports (2)

Connect optional USB devices.

(4)

Power connector

Connects an AC adapter.

(5)

Battery/AC adapter light

●

White: The computer is connected to external power
and the battery is fully charged.

●

Amber: A battery is charging.

●

Blinking amber: The battery has reached a low
battery level, or there is a battery error. When a
battery reaches a critical battery level, the battery
light begins blinking rapidly.

(6)

Security cable slot

Attaches an optional security cable to the computer.

NOTE:

The security cable is designed to act as a

deterrent, but it may not prevent the computer from being
mishandled or stolen.

16

Chapter 2   External component identification

Summary of Contents for Compaq 436






























































































































Reviews:

No comments