manualshive.com logo in svg

HP Compaq 436, Maintenance And Service Manual, Page: 23 / 125

Share
Download
HP Compaq 436 Maintenance And Service Manual Download Page 23

Left side

Item

Component

Description

(1)

External monitor port

Connects an external VGA monitor or projector.

(2)

Vents (2)

Enable airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal
for the internal fan to cycle on and off during
routine operation.

(3)

RJ-45 (network) jack

Connects a network cable.

(4)

HDMI port (select models only)

Connects an optional video or audio device, such as a
high-definition television, or any compatible digital or
audio component.

(5)

USB port

Connect optional USB devices.

(6)

Audio-in (microphone) jack

Connects an optional computer headset microphone,
stereo array microphone, or monaural microphone.

(7)

Audio-out (headphone) jack

Produce sound when connected to optional powered
stereo speakers, headphones, ear buds, a headset, or
television audio.

WARNING!

To reduce the risk of personal injury,

adjust the volume before putting on headphones,
earbuds, or a headset. For additional safety information,
refer to the 

Regulatory, Safety, and

Environmental Notices

.

NOTE:

When a device is connected to the jack, the

computer speakers are disabled.

(8)

Digital Media Slot

Supports the following digital card formats:

●

MultiMediaCard (MMC)

●

Secure Digital (SD) Memory Card

●

Secure Digital High Capacity (SDHC) Memory Card

●

Secure Digital Extended Capacity (SDxC)
Memory Card

Left side

15

Summary of Contents for Compaq 436






























































































































Reviews:

No comments