5-2
Setup Configuration Utility
Startup Memory Disks Components Power Exit
Floppy Drive A = 1.44 Mb
Floppy Drive B = None
CPU Clock = 350 MHz
Hard Drive C = 2067 MB
Hard Drive D = 0 MB
Hard Drive E = 0 MB
Hard Drive F = 0 MB
Serial Port 1 = COM1, 3F8, IRQ 4
Base = 640 KB
Serial Port 2 = COM2, 2F8, IRQ 3
Extended = 56320 KB
Parallel Port = LPT1, Addr 378, IRQ 7
Shadow = 64 KB
Reserved = 320 KB
Total RAM = 57344 KB
Cache (Ext) = 1024 KB
Figure 5-1. Main SCU Screen
The SCU screen is divided into three areas:
•
On the top line of the screen is the menu bar, which lists the titles of the
available menus. Each menu title contains a pull-down menu, which
displays items for settings.
•
The middle section of the screen displays current settings of the system. If
you open a pull-down menu and select an item that provides multiple
options, a submenu will pop up and let you make further selections.
•
The bottom window provides alternative information. Normally it gives the
keyboard/mouse instructions for moving around and making selections.
When a menu item is highlighted, the window will provide more detailed
description of the item.
Moving Around and Making Selections
You must go through two or three levels to complete the setting for an item. In
most cases, there are three levels: menu title, pull-down menu, and submenu.
To move around and make selections, you can use both the TouchPad/mouse
and keyboard.
Using the TouchPad/Mouse
Using the TouchPad or mouse is recommended. It is more straightforward than
using the keyboard.
For most items, simply move the pointer with the TouchPad/mouse and left-click
on the intended item. To cancel your selection, click the right button. For some
items, you will need to select with the arrow keys.
