HP Chromebook 14 G6 Maintenance And Service Manual Download

Page: 11 / 62

Display

Component

Description

(1)

WLAN antennas*

Send and receive wireless signals to communicate with WLANs.

NOTE:

the position of the WLAN antennas may differ,

depending on the product.

(2)

Internal microphones (2)

Record sound.

(3)

Camera

Records video, captures still photographs, and allows video
conferences and online chat by means of streaming video.

(4)

Privacy shutter

Covers the camera for privacy.

(5)

Camera light

On: the camera is in use.

*The antennas are not visible from the outside of the computer, and antenna location varies. For optimal transmission, keep the areas
immediately around the antennas free from obstructions.

For wireless regulatory notices, see the section of the

Regulatory, Safety, and Environmental Notices

that applies to your country or region.

This guide is provided in the box.

Display

Summary of Contents for Chromebook 14 G6































































Search results

Summary of Contents for Chromebook 14 G6

Reviews:

Related manuals for Chromebook 14 G6

Brands by name

Popular brands

HP Chromebook 14 G6, Maintenance And Service Manual

Search results

Summary of Contents for Chromebook 14 G6

Reviews:

Related manuals for Chromebook 14 G6

Brands by name

Popular brands