Connecting the CD-Writer
11
5.
Connect the power supply to the power connector on the back of
the CD-Writer, with the arrow on the cable end facing up.
6.
Connect one end of the power cord into the power supply and
the other end to a wall outlet or power strip. (The power plug and
outlet may look different in your country.)
When you plug in the power supply, the green light on the power
supply should be on. You should also notice that the CD-Writer is
on.
NOTE: There is no power switch on the CD-Writer. It remains on in
standby mode as along as it is plugged in. It goes into operating mode
automatically.
7.
Turn your computer on, if it is not already turned on.
Power connector
Power connector
(arrow up)
To power supply
Power supply
To CD-Writer
Power cord
Summary of Contents for CD-Writer 6020
