HP BladeSystem c3000 Setup And Installation Manual Download | Manualshive

Page: 56 / 94

background image

Cabling and powering up the enclosure 56

Installing a PDU

The PDU can be installed in either a 1U or a 0U configuration. See the installation instructions that came with
the PDU for specific details on installing the PDU into the rack.

NOTE:

Total VA load of the attached enclosures should not exceed the VA capacity of the PDU.

Do not exceed the rated current on circuit breakers.

To connect power to the PDU:

1.

Connect the power cables to the power supplies.

2.

Connect the AC power cables to the installed PDU.

3.

Continue powering up the enclosure.

Powering up the enclosure

WARNING:

Be sure that all circuit breakers are locked in the off position before connecting any

power components.

1.

Connect the power cables to the power supplies.

2.

Connect the power cables to the power source or to an installed PDU.

3.

Turn on the AC circuit breakers that power the power cables installed in the enclosure.

When the enclosure powers up for the first time, several minutes might pass before all blades are initialized

and recognized by the Onboard Administrator. Complete initialization depends on the number of blades
configured in the enclosure. Blades are powered up incrementally, starting from device bay 1.
When first initialized, the Onboard Administrator programs the mezzanine cards on the blades during

discovery. After the mezzanine cards are programmed, powering up the enclosure takes only 1 to 2 minutes.
The enclosure and the Insight Display now have power. Configure the enclosure using the Insight Display.

«
...
54
55
56
57
58
...
»

Summary of Contents for BladeSystem c3000































































































Reviews:

No comments

Related manuals for BladeSystem c3000

Expansion Chassis

Brand: Dayna Pages: 7

Brand: Overland Storage Pages: 4

Brand: WP Pages: 30

Brand: InWin Pages: 14

Brand: Blonder tongue Pages: 12

Brand: Haivision Pages: 29

Network Convergence System 6000 Fabric Card Chassis

Brand: Cisco Pages: 202

Nexus 3000 series

Brand: Cisco Pages: 356

Brand: Cisco Pages: 34

Brand: Cisco Pages: 402

Brand: Cisco Pages: 508

Brand: Cisco Pages: 12

NCS 4000 Series

Brand: Cisco Pages: 82

Brand: Cisco Pages: 85

Brand: Xena Networks Pages: 16

Brand: Telebyte Pages: 40

Brand: Lindy Pages: 20

PXI Express NI PXIe-1065

Brand: National Instruments Pages: 75

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands