manualshive.com logo in svg

HP BL35p - ProLiant - 2 GB RAM, User Manual, Page: 30 / 95

Share
Download
HP BL35p - ProLiant - 2 GB RAM User Manual Download Page 30

 

Hardware options installation 30 

7.

 

Install the FC adapter. 

 

Refer to Internal components (on page 

8

) for the location of the FC adapter connectors. 

The HP ProLiant BL35p Server Blade requires specific Microsoft® Windows® SAN drivers to support an 

optional dual port Fibre Channel adapter. 
To download the most current SAN driver, begin by referring to the HP support website 

(

http://www.hp.com/support/files

). 

At the support website, enter the product name, select the task to download drivers and software, and 

follow the on-screen instructions. 

 

Multifunction network adapter option 

Before installing the component: 

1.

 

Back up all server blade data. 

2.

 

Be sure that the server blade has the most recent ROM version. 

  

CAUTION:

  Be sure that you have the current version of the system ROM. Without the correct firmware 

version, the server and hardware options may not function properly. For the most current version of the 

ROM, go to the HP website (

http://www.hp.com/support

). 

3.

 

Power down the server blade (on page 

12

). 

4.

 

Remove the server blade (on page 

13

) from the sleeve. 

5.

 

Remove the standard NIC mezzanine card. 

Summary of Contents for BL35p - ProLiant - 2 GB RAM
































































































Reviews:

No comments