HP Network Storage
HP Network Storage
HP Network Storage
HP Network Storage
Servers
Servers
Servers
Servers
HP X1800sb G2 Network Storage Blade is a flexible storage server solution for BladeSystem
environments. Combine the X1800sb G2 with the SB40c Storage Blade to enable file serving and iSCSI
shared storage inside the BladeSystem enclosure. The flexibility of the X1800sb G2 extends to external
storage as well. The X1800sb G2 can also be used as a low cost SAN gateway to provide consolidated
file-serving access to FC, SAS, or iSCSI SANs.
Built on the HP ProLiant BL460c G7 Server Blade, the HP X1800sb G2 Network Storage Blade with an
SB40c is a ready to deploy shared storage solution, with Microsoft Storage Server 2008 R2, Standard
x64 Edition pre-installed. The HP Rapid Start-up Wizard accelerates new deployments by walking you
through basic system settings step-by-step. The X1800sb G2 also includes Microsoft iSCSI Software
Target.
NOTE:
NOTE:
NOTE:
NOTE: See the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13840_div/13840_div.html
The X3800sb G2 Network Storage Gateway Blade is used to access FC, SAS, or iSCSI SAN storage,
translating file data from the server into blocks for storage to provide consolidated file, print, and
management hosting services in a cluster-able package.
Built on the HP ProLiant BL460c G7 Server Blade, the HP X3800sb G2 Network Storage Gateway Blade
is a ready to deploy SAN gateway solution, with Microsoft Storage Server 2008 R2, Enterprise x64
Edition pre-installed. The HP Rapid Start-up Wizard accelerates new deployments by walking you through
basic system settings step-by-step. The X3800sb G2 also includes a Microsoft Cluster Server (MSCS)
license and Microsoft iSCSI Software Target.
NOTE:
NOTE:
NOTE:
NOTE: See the QuickSpecs for Technical Specifications and additional information:
http://h18000.www1.hp.com/products/quickspecs/13842_div/13842_div.html
HP BladeSystem c-Class
HP BladeSystem c-Class
HP BladeSystem c-Class
HP BladeSystem c-Class
c3000 Enclosure
c3000 Enclosure
c3000 Enclosure
c3000 Enclosure
A BladeSystem c3000 enclosure holds up to 8 server and/or storage blades plus redundant or non-
redundant network and storage switches. It includes a shared, multi-terabit high-speed mid-plane for
wire-once connectivity of server blades to network and shared storage. Power is delivered through a
pooled power backplane that ensures the full capacity of the power supplies is available to all blades.
Each c3000 enclosure is built with the following functions:
Up to 8 half-height and/or up to 4 full-height server blades and/or storage blades per enclosure.
Up to 3 different interconnect fabrics (Ethernet, FC, IB, iSCSI, SAS, etc.) supported simultaneously
within the enclosure.
A single-phase power subsystem - for flexibility in connecting to datacenter power, or to UPS's or to
low-line wall outlets.
Choice of AC or DC power supplies.
PARSEC enclosure design - Parallel, redundant and scalable cooling and airflow design.
Four (4) to Six (6) Active Cool fans
Fully redundant design - no single point of failure; redundant interconnections between servers
and interconnect modules; a mid-plane with no active components; redundant cooling using
Active Cool fans; all devices are hot-pluggable and customer replaceable.
Best performance per watt - lower wattage per server blade, in comparison to rack-mounted
servers
Full AC redundancy - with no power zones.
Single or Dual Onboard Administrator management modules
An Onboard Administrator management module is built in to the enclosure with the following functions:
Robust, multiple enclosure setup and control.
Reports asset and inventory information for the devices in the enclosure.
QuickSpecs
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c3000 Enclosure
HP BladeSystem c-Class Overview
DA - 12790 Worldwide — Version 42 — November 14, 2011
Page 7
