HP AW563A, Quickspecs

Page: 34 / 36

NOTE: NOTE: NOTE: NOTE: Full-height servers should be populated from the bottom to the top (bays 1 thru 4). With four fans, only the bottom 2 bays
can be used; with six fans, all bays can be used.
Mixed Configuration – Full Height and Half Height Population Mixed Configuration – Full Height and Half Height Population Mixed Configuration – Full Height and Half Height Population Mixed Configuration – Full Height and Half Height Population
The c3000 enclosure is divided into 2 zones or quadrants by the horizontal support metalwork. Zone 1 includes bays 1, 2, 5, and 6;
Zone 2 contains bays 3, 4, 7, and 8. Within each zone a removable divider is used to support half height devices. To install a full-
height blade in either zone this divider must be removed. An optional mini-divider support bracket is included with every c3000
enclosure. When using a mix of full-height and half height blades in Zone 2, the optional mini-divider can be used to help support
the half-height blades if they are being used in slots 7 and/or 8. Each zone can support up to 2 full-height blades, or up to 4 half
height blades, or a mix of 1 full-height blade and up to 2 half-height blades.
NOTE: NOTE: NOTE: NOTE: Please read the RTF card (included with each c3000 enclosure) and the "HP BladeSystem c3000 Setup and Installation
Guide" for more information on using bay dividers and the mini-divider for mixed configurations.
NOTE:
NOTE: NOTE: NOTE: Storage or tape blades can be installed in the same zone as both full-height and half-height blades, a bracket ships with
each SB40c that allows a half-height blade to be mounted to the storage or tape blade.
NOTE:
NOTE: NOTE: NOTE: In this case, the SB40c or tape blade cannot be removed without first removing the half height blade and mounting bracket.
NOTE:
NOTE: NOTE: NOTE: For Mixed configurations of full height and half height population rules; please see the c3000 Enclosure installation and
users guide at:
http://h71028.www7.hp.com/enterprise/cache/316682-0-0-0-121.html and the user guides for the blades being
configured.
Enclosure Unit – Enclosure Unit – Enclosure Unit – Enclosure Unit –
Rack Model
Rack Model Rack Model Rack Model
Dimensions Dimensions Dimensions Dimensions (H x W x D)
(with bezel) 10.4 x 19.1 x 32.977 in (265 x 485 x 835 mm)
Weight Weight Weight Weight
(approximate) Maximum
(one enclosure with 8
blades and 4 interconnects
installed) 300 lb (136 kg)
Minimum
(one enclosure without
blades and interconnects) 130 lb (59 kg)
Input Requirements Input Requirements Input Requirements Input Requirements
(per AC power supply) Rated Line Voltage 90 – – – – 132 VAC
180 – – – – 264 VAC
Rated Input Current 9.3 A (at 100 VAC)
9.7 A (at 120VAC)
7.8 A (at 200 VAC)
7.2 A (at 208 VAC)
6.8 A (at 220 VAC)
6.2 A (at 240 VAC)
Rated Input Frequency 47 to 63 Hz
BTU Rating BTU Rating BTU Rating BTU Rating Maximum per power
supply 2728 BTU/hr (at 100 VAC)
3069 BTU/hr (at 120VAC)
4092 BTU/hr (at 200 to 240 VAC)
Power Specifications Power Specifications Power Specifications Power Specifications To review typical system power ratings use the Power Calculator which is
available via the online tool located at URL:
www.hp.com/go/bladesystem/powercalculator
Power Supply Output Power Supply Output Power Supply Output Power Supply Output
(per power supply) Rated Steady-State Power 800 W (at 100 VAC)
900 W (at 120 VAC)
1200 W (at 200 to 240 VAC)
QuickSpecs
HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure HP BladeSystem c3000 Enclosure
Technical Specifications
DA - 12790 Worldwide — Version 42 — November 14, 2011 Page 34