manualshive.com logo in svg

HP Apollo 2000 System, User Manual, Page: 151 / 203

Share
Download
HP Apollo 2000 System User Manual Download Page 151

20.

Connect the power cable to the bayonet board. For more information, see "

Accelerator cabling

."

21. Install the three-slot riser cage assembly

.

22. Install the node into the chassis

.

23.

Connect all peripheral cables to the node.

24. Power up the node

.

Installing the M.2 SATA SSD enablement board option

About this task

The M.2 SATA SSD enablement board can only be installed on the single-slot left PCI riser cage assembly
(PN 798178-B21) or the single-slot 2U node PCI riser cage assembly (PN 800293-B21).

For more information about product features, specifications, options, configurations, and compatibility, see the
product QuickSpecs on the 

Hewlett Packard Enterprise website

.

Procedure

1.

Power down the node

.

2.

Disconnect all peripheral cables from the node.

3.

Remove the node from the chassis

.

4.

Place the node on a flat, level surface.

5.

Do one of the following:

a. Remove the single-slot left PCI riser cage assembly

.

b. Remove the single-slot 2U node PCI riser cage assembly

.

6.

If installed, remove the storage controller.

7.

Install the enablement board on the PCI riser cage assembly, and then secure it with a T-15 screw.

• Single-slot left PCI riser cage assembly

Installing the M.2 SATA SSD enablement board option

151

Summary of Contents for Apollo 2000 System












































































































































































































Reviews:

No comments