Smart Array 6404 Controller HP-UX Installation
Smart Array 6404 HP-UX Software Installation
Chapter 1
11
Step 3.
Mount the CD-ROM drive by using the System Administration Manager (SAM).
•
Run SAM using the following command:
$
sam
NOTE
System Administration Manager (SAM) is deprecated in HP-UX 11i v3, and
replaced by System Management Homepage (SMH). When you start SAM, the
SMH command is automatically called. For more information, see the smh(1M)
man page.
•
Select
Disk and File System
•
Select
Disk Devices
•
Select the CD-ROM drive that contains your software media
•
Select
Mount
from the Actions Menu
•
Specify the mount directory and deselect the
At Every System Boot
option
Step 4.
Run the swinstall program using the following command:
$ /usr/sbin/swinstall
This opens the
Software Selection
window.
Step 5.
Change the Source Depot Type and Source Host Name, if necessary, and enter the software location
in the Source Depot Path field. If installing from CD-ROM, the software location is the mount
directory. Select the
OK
button to return to the Software Selection window.
Step 6.
The
Software Selection
window now contains a list of available software to install.
Step 7.
Highlight the Smart Array 6404 software, for example:
RAID-01 B.11.23.02 RAID SA; Supptd HW=A7143A/A9890A/A9891A
Choose
Mark for Install
from the
Actions
menu; this chooses the highlighted software.
Step 8.
From the
Actions
menu, select the
Install...
menu. This begins product installation and opens the
Install Analysis
window.
Step 9.
Click
OK
in the
Install Analysis
window when the Status field displays a
Ready
message.
Step 10.
Click
YES
in the
Confirmation
window to start software installation.
When the processing is finished, the
Status
field displays a
Ready
message. Select
Done.
The
Note
window opens.
Step 11.
Click
OK
in the
Note
window to reboot. The user interface disappears and the system reboots.
When the system comes back up, log on to the system as root and view the
/var/adm/sw/swagent.log
and
/var/adm/sw/swinstall.log
files to view error or warning
messages that may have occurred during the installation.
Step 12.
Verify that all installed Smart Array 6404 controllers have a software state of
CLAIMED
, by running
the
ioscan -fnC ext_bus
|grep ciss command.
