Smart Array 6404 Controller OpenVMS Installation
Smart Array 6404 OpenVMS Installation Prerequisites
Chapter 2
19
Smart Array 6404 OpenVMS Installation Prerequisites
Before installing the Smart Array 6404 controller, ensure that you have the following software and firmware:
•
OpenVMS Version V8.2-1 (or later) for Integrity servers.
•
TCP/IP Version 5.5 or later.
•
Smart Array firmware Version 2.58 or later. Refer to the
http://www.hp.com
website to download Version
2.58 firmware. From the HP website, choose Software and Driver Downloads. Once on this page, enter
the product number of your smart array controller, and choose Download Driver and Software (firmware).
•
HP Insight Management Agents for OpenVMS V3.3 or later and any prerequisite software. Software
documentation and downloads can be obtained from the following website:
http://h71000.www7.hp.com/openvms/products/mgmt_agents/
.
•
HP Array Configuration Utility (ACU-XE) for Integrity Servers Version 6.4 or later and any prerequisite
documentation. Software documentation and downloads can be obtained from the following website:
http://h71000.www7.hp.com/openvms/products/mgmt_agents/
.
Also make sure that you review the following documentation:
•
Check the Smart Array 6404 Release Notes available at
http://docs.hp.com
in the IO Cards and
Networking Software section for known problems or other information needed for installation.
•
Confirm that the Smart Array 6404 controller and software are supported on the HP Integrity server and
I/O slot chosen. Refer to the Smart Array 6404 Controller Support Matrix located
http://docs.hp.com
in
the IO Cards and Networking Software section for more information.
