HP A5120 EI Series Command Reference Manual Download Page 128

Page: 128 / 225

120

begin

: Displays the first line that matches the specified regular expression and all lines that follow.

exclude

: Displays all lines that do not match the specified regular expression.

include

: Displays all lines that match the specified regular expression.

regular-expression

: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Description

Use the

display udp statistics

command to display statistics of UDP packets.

Related commands:

reset udp statistics

Examples

# Display statistics of UDP packets.

<Sysname> display udp statistics

Received packets:

Total: 0

checksum error: 0

shorter than header: 0, data length larger than packet: 0

unicast(no socket on port): 0

broadcast/multicast(no socket on port): 0

not delivered, input socket full: 0

input packets missing pcb cache: 0

Sent packets:

Total: 0

Table 30

Output description

Field

Description

Received
packets:

Total

Total number of UDP packets received

checksum error

Total number of packets with incorrect checksum

shorter than header

Number of packets with data shorter than head

data length larger than packet

Number of packets with data longer than packet

unicast(no socket on port)

Number of unicast packets with no socket on port

broadcast/multicast(no socket on
port)

Number of broadcast/multicast packets without socket
on port

not delivered, input socket full

Number of packets not delivered to an upper layer due
to a full socket cache

input packets missing pcb cache

Number of packets without matching protocol control
block (PCB) cache

Sent packets: Total

Total number of UDP packets sent

ip forward-broadcast (interface view)

Syntax

ip forward-broadcast

[

acl

acl-number

]

undo ip forward-broadcast

Summary of Contents for A5120 EI Series


































































































































































































































Search results

Summary of Contents for A5120 EI Series

Reviews:

Related manuals for A5120 EI Series

Brands by name

Popular brands

HP A5120 EI Series, Command Reference Manual

Search results

Summary of Contents for A5120 EI Series

Reviews:

Related manuals for A5120 EI Series

Brands by name

Popular brands