62
4.
Save the new password.
[Sysname] save
NOTE:
•
To save the new password, execute the
save
command after modifying the user password.
•
HP recommends saving the modification as the default configuration file.
Super password loss
In the case of super password loss, you cannot perform higher level operations.
You can clear the super password by selecting
8
on the main BootWare menu.
========================<EXTEND-BootWare MENU>========================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Modify BootWare Password |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
======================================================================
Enter your choice(0-9):8
The following output indicates that you have successfully cleared the super password.
Clear Application Password Success!
NOTE:
•
Select option
8
, quit the menu, reboot the firewall, and then you can enter system view directly.
•
This setting (password clearing) is valid only for the first reboot of the firewall. The super password will
be restored after a second reboot.
Cooling system failure
When the temperature inside the firewall exceeds 75°C (167°F), the following information appears on
the configuration terminal:
%May 14 21:37:35:271 2010 HP DRVMSG/3/Temp2High:
Environment temperature too high in Slot 0, index is 2.
#May 14 21:37:35:713 2010 HP DEV/1/BOARD TEMPERATURE UPPER:
Trap 1.3.6.1.4.1.2010.2.23.1.12.1.16: frame Index is 0, slot Index 0.0
%May 14 21:37:35:713 2010 HP DEV/4/BOARD TEMP TOOHIGH:
Board temperature is too high on Frame 0 Slot 0, type is MPU.
