3-8
Using the Switch
To set dual port A switches
To set dual port A switches
The 2 ×
N switch has two Port A channels and multiple Port B channels.
1
To select the Port A channel, press:
SWITCH PORT
The Port A channels are shown in inverse video and the prompt,
Port A
active
, appears at the bottom of the display.
2
To select a Port B channel, again press:
SWITCH PORT
The Port B channels are shown in inverse video and the prompt,
Port B
active
, appears at the bottom of the display.
3
Use the arrow keys to change the channel.
You can also use the numeric keys to enter the desired channel. For example:
4
followed by
ENTER
.
The new connection is displayed on the front-panel display.
Adjusting Display Contrast
To adjust the contrast of the display, press the
key. Use the arrow keys to
select the desired contrast, then press
ENTER
.
Saving Switch States
Summary of Contents for 86060C Series
