HP 86060C Series, User Manual

Page: 100 / 104

5-8
Servicing
Electrostatic Discharge Information
To ensure user safety, the static-safe accessories must provide at least 1 M
Ω
of
isolation from ground. Refer to Table 3 on page 5-8 for information on ordering
static-safe accessories.
W A R N I N G These techniques for a static-safe work station should not be used
when working on circuitry with a voltage potential greater than
500 volts.
Reducing ESD
Damage The following suggestions may help reduce ESD damage that occurs during
testing and servicing operations.
• Personnel should be grounded with a resistor-isolated wrist strap before re-
moving any assembly from the unit.
• Be sure all instruments are properly earth-grounded to prevent a buildup of
static charge.
Table 3. Static-Safe Accessories
HP Part Number Description
9300-0797
Set includes: 3M static control mat 0.6 m
×
1.2 m (2 ft
×
4 ft) and 4.6 cm
(15 ft) ground wire. (The wrist-strap and wrist-strap cord are not included.
They must be ordered separately.)
9300-0980 Wrist-strap cord 1.5 m (5 ft)
9300-1383 Wrist-strap, color black, stainless steel, without cord, has four adjustable
links and a 7 mm post-type connection.
9300-1169 ESD heel-strap (reusable 6 to 12 months).