manualshive.com logo in svg

HP 81200, Installation Manual, Page: 48 / 76

Share
Download
HP 81200 Installation Manual Download Page 48

Start the System

Select the System Operating Mode

48

Select the System Operating Mode

After installation of the HP E4873A User Software the HP 81200 Configuration screen pops up 
automatically. In other cases it can be opened with double-click the “HP 81200 Config” icon on the 
Windows desktop.

Figure 6

 HP 81200 Configuration Window

The HP 81200 software can be run in one of three modes. Selecting one of these modes automatically 
selects the recommended programs required for that mode.

 •

Local:

Used, if the hardware shall be controlled and the system operated from the same embedded 
computer. The HP 81200 server and user interface are started.

Also needed, if the system is controlled via an IEEE-1394 or MXI-2 interface by an external PC.

 •

Controlled:

Used, if the hardware shall be controlled but the system shall not be operated from the built-in 
computer. The system can then be operated via HP-IB or LAN. The HP 81200 server is started.

 •

Remote:

Used to operate a system which is in controlled mode remotely. The HP 81200 user interface is 
started.

Changing this predefined values is recommended for experienced users only:

 •

Check Module Version

If activated, the firmware located on hardware modules is checked for consistency with the current 
used User Software during power up. In case of inconsistency a BIOS update program is activated 
to guide you through the procedure. Field should be deactivated if the User Software is used in off-
line mode or remotely.

 •

Firmware Server

Must be activated on the machine controlling the hardware, because it build the connection 
between hardware modules and interfaces.

Summary of Contents for 81200













































































Reviews:

No comments