manualshive.com logo in svg

HP 81200, Installation Manual, Page: 23 / 76

Share
Download
HP 81200 Installation Manual Download Page 23

Setting up a proprietary System

Setting up an HP 81200 System based on HP E4849A/B Mainframe

23

1. Check that all generator/analyzer modules are connected to the clock module by a clock 

distribution cable, HP part number E4805-61601.

Figure 10

Check whether all modules are connected to clock module

Connecting external peripherals

For displaying and data entry with the HP E4849A/B based systems it is possible to connect either an 
optional available display and entry panel (Option 001), or a monitor, keyboard and mouse

A. Connecting the Option 001, Display and Entry Panel

On the Display and Entry Panel there are three cables. One cable has the label “Keyboard’, another 
cable has the label “Touchpad”, and the third cable is the display cable.

1. Connect the cable with the label “Keyboard” to the connector on the front panel of the mainframe 

with the keyboard symbol

2. Connect the cable with the label “Touchpad” to the connector on the front panel of the mainframe 

with the mouse symbol.

3. The third cable has to be connected to the connector named “HP 81200 DISPLAY” on the front 

panel. 

Summary of Contents for 81200













































































Reviews:

No comments