27
Programming Reference
HP 81101A SCPI Command Summary
:OUTPut[1]
[:NORMal]
[:STATe]
OFF|ON|1|0
Set/read normal output state
:IMPedance
[:INTernal]
<value>
Set/read internal source impedance of
output
:EXTernal
<value>
Set/read expected external load imped-
ance at output
:POLarity
NORM|INV
Set/read output polarity
[:SOURce]
:CURRent[1]
[:LEVel]
[:IMMediate]
[:AMPLitude]
<value>
Set/read channel amplitude current
:OFFSet
<value>
Set/read channel offset current
:HIGH
<value>
Set/read channel high level current
:LOW
<value>
Set/read channel low level current
:LIMit
[:HIGH]
Set/read maximum current limits
:LOW
Set/read minimum current limits
:STATe
ON|OFF|1|0
Enable/Disable the current limits
:FREQency
[:CW | :FIXed]
<value>
Set/read frequency of pulses
:AUTO
ONCE
Measure frequency at CLK-IN
:HOLD[1]
VOLT|CURR
Switch between VOLtage and CURRent
command subtrees
:PHASe[1]
[:ADJust]
<value>
Set/read channel phase
:PULSe
:DCYCLe[1]
<value>
Set/read channel duty cycle
:DELay[1]
<value>
Set/read channel delay (to leading edge)
:HOLD
TIME|PRATio
Hold absolute delay|phase delay fixed
with varying frequency
:UNIT
S|SEC|PCT|DEG|RAD
Set/read delay units
Command
Parameter
Description
see
page