HP 743 Series Technical Reference Manual For Oems Download

Page: 88 / 152

4-29

Mechanical Information

Model 748 Chassis and Modules

Chassis Parts and Models

Table 4-3 shows the assembly group, included subassemblies, and mechanical drawing refer-
ence number for the Model 748 chassis parts and modules.

Table 4-3

Mechanical Drawings for Chassis Parts and Modules

Assembly Group

Included Subassemblies

Subassembly Drawing

Number

Model 748 chassis

Trim piece

C-A2261-40019-10

Front bezel (cover)

D-A2261-40003-10

Light pipe assembly

D-A2261-40004-10

Removable wall

C-A4309-00003-10

Left wall assembly

C-A4309-00004-10

Chassis

D-A4309-00011-10

Power distribution board

D-A4309-66002-10

Mass storage module

Tray

D-A4309-00005-10

PCI/EISA module

4-slot chassis

C-A4309-00010-10

VME module

Card cage

D-A4309-00006-10

Power supply module

D-0950-2303-10

Model 743/744 system board

Front panel

D-A2636-00001-10

GSC expansion

GSC video bulkhead

C-A2636-00005-10

Double-high bulkhead

D-A2636-00002-10

GSC blank bulkhead

C-A2636-00010-10

Blank VME bulkhead

D-A2636-00004-10

Two-slot adapter board

D-A2636-66012-10

PMC expansion

PMC bridge adapter

D-A4504-66001-10

PMC expansion adapter

D-A4505-66002-10

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for 743 Series

























































































































































Search results

Summary of Contents for 743 Series

Reviews:

Related manuals for 743 Series

Brands by name

Popular brands

HP 743 Series, Technical Reference Manual For Oems

Search results

Summary of Contents for 743 Series

Reviews:

Related manuals for 743 Series

Brands by name

Popular brands