background image

 

Regulatory compliance notices  12 

Regulatory compliance notices 

Regulatory compliance identification numbers 

For the purpose of regulatory compliance certifications and identification, this product has been assigned a 
unique regulatory model number. The regulatory model number can be found on the product nameplate 

label, along with all required approval markings and information. When requesting compliance information 

for this product, always refer to this regulatory model number. The regulatory model number is not the 

marketing name or model number of the product. 

 

Federal Communications Commission Notice 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can be 

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by 

one or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit that is different from that to which the receiver is 
connected. 

 

Consult the dealer or an experienced radio or television technician for help. 

 

Modifications 

The FCC requires the user to be notified that any changes or modifications made to this device that are not 

expressly approved by Hewlett-Packard Company may void the user’s authority to operate the equipment. 

 

European Union regulatory notice 

Products bearing the CE marking comply with the following EU Directives: 

 

Low Voltage Directive 2006/95/EC 

 

EMC Directive 2004/108/EC 

 

Ecodesign Directive 2009/125/EC, where applicable 

CE compliance of this product is valid if powered with the correct CE-marked AC adapter provided by HP.   
Compliance with these directives implies conformity to applicable harmonized European standards 

(European Norms) that are listed in the EU Declaration of Conformity issued by HP for this product or product 

Summary of Contents for 697497-001


















Reviews: