HP 6200YL Reference Manual Download Page 168

Page: 168 / 765

dhcp-snooping

OVERVIEW

Category:

config

Primary context:

Related Commands

Usage: [no] dhcp-snooping

Description: Enable/Disable the global administrative status of

DHCP snooping. No snooping will be performed on
any VLAN if the global administrative status is disabled.
The default state is disabled.

COMMAND STRUCTURE

■

[no] dhcp-snooping

authorized-server

-- Configure valid DHCP Servers

(p. 167)

■

NONAME2

-- DHCP Server address. (IP-ADDR)

(p. 168)

■

[no] dhcp-snooping

database

-- Configure lease database transfer options

(p. 167)

■

delay

< 15 to 86400 > -- Seconds to delay writing to the lease database file.

(p. 168)

■

file

-- URL Format: "tftp://<ip-address>/<filename>". (ASCII-STR)

(p. 168)

■

timeout

< 0 to 86400 > -- Seconds to wait for the transfer before failing.

(p. 169)

■

[no] dhcp-snooping

option

-- Configure DHCP snooping operational behavior

(p. 168)

■

(p. 166)

■

remote-id

< mac | subnet-ip | mgmt-ip > -- Set relay information option remote-id value to

use. (NUMBER)

(p. 169)

■

untrusted-policy

< drop | keep | replace > -- Policy for DHCP packets received on untrusted

ports thatcontain option 82. (NUMBER)

(p. 169)

■

[no] dhcp-snooping

trust

-- Configure trusted interfaces

(p. 169)

■

port-list

-- ([ethernet] PORT-LIST)

(p. 169)

■

[no] dhcp-snooping

verify

-- Enable/Disable DHCP packet validation

(p. 169)

■

mac

-- Verify DHCP header client hardware address.

(p. 168)

■

dhcp-snooping

vlan

-- Enable/Disable snooping on a VLAN (VLAN-ID-RANGE)

(p. 170)

■

vlan-list

-- (VLAN-ID-RANGE)

(p. 170)

COMMAND DETAILS

untrusted-policy (p. 169)

authorized-server (p. 167)

vlan (p. 170)

port-list (p. 169)

database (p. 167)

vlan-list (p. 170)

remote-id (p. 169)

■

[no] dhcp-snooping option 82

Next Available Options:

■

untrusted-policy

< drop | keep | replace > -- Policy for DHCP packets received on untrusted

ports thatcontain option 82. (NUMBER)

(p. 169)

166

2009 Hewlett-Packard Development Company, L.P.

Summary of Contents for 6200YL






























































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands

HP 6200YL, Reference Manual

Search results

Summary of Contents for 6200YL

Reviews:

Related manuals for 6200YL

Brands by name

Popular brands