Computer Setup—Storage
NOTE:
Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2-3
Computer Setup—Storage
Option
Description
Device Configuration
Lists all installed BIOS-controlled storage devices.
When a device is selected, detailed information and options are displayed. The following options
may be presented:
CD-ROM
: Size, model, firmware version, serial number, connector color (not included for USB
CD-ROM).
Hard Disk
: Size, model, firmware version, serial number, connector color.
●
SMART (ATA disks only)
●
Translation mode (ATA disks only)
●
Connector color
(ATA disks only)
Lets you select the translation mode to be used for the device. This enables the BIOS to
access disks partitioned and formatted on other systems and may be necessary for users of
older versions of UNIX (e.g., SCO UNIX version 3.2). Options are Automatic, Bit-Shift,
LBA Assisted, User, and Off.
Available only when the drive translation mode is set to User, allows you to specify the
parameters (logical cylinders, heads, and sectors per track) used by the BIOS to translate
disk I/O requests (from the operating system or an application) into terms the hard drive can
accept. Logical cylinders may not exceed 1024. The number of heads may not exceed 256.
The number of sectors per track may not exceed 63.
CAUTION:
Ordinarily, the translation mode selected automatically by the BIOS should not
be changed. If the selected translation mode is not compatible with the translation mode that
was active when the disk was partitioned and formatted, the data on the disk will be
inaccessible.
Diskette
: Model and firmware version.
NOTE:
Displays for USB diskette drives.
Default Values
(ATA disks only)
SATA Defaults
See Translation Mode above for details.
Computer Setup (F10) Utilities
7
Summary of Contents for 6200 Pro Series Microtower
Page 4: ...iv About This Book ...
