286
Step Command
Remarks
4.
Create the BGP IPv6 unicast
family and enter its view.
address-family ipv6
[
unicast
]
By default, the BGP IPv6 unicast
family is not created.
5.
Enable IPv6 unicast route
exchange with the specified
peer or peer group.
peer
{
group-name
|
ipv6-address
[
prefix-length
] }
enable
By default, BGP does not
exchange IPv6 unicast routes
with any peer.
6.
(Optional.) Configure route
redistribution.
import-route
protocol
[
process-id
[
med
med-value
|
route-policy
route-policy-name
]
* ]
A CE must redistribute its routes
to the PE so the PE can advertise
them to the peer CE.
Configuring routing between PEs
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Configure the remote PE as
the peer.
peer
{
group-name
|
ip-address
[
mask-length
] }
as-number
as-number
By default, no BGP peer is
configured.
4.
Specify the source interface
for route update packets sent
to the specified peer.
peer
{
group-name
|
ip-address
[
mask-length
] }
connect-interface
interface-type
interface-number
By default, BGP uses the outbound
interface of the best route destined
to the BGP peer as the source
interface.
5.
Create the BGP VPNv6
address family and enter its
view.
address-family vpnv6
By default, the BGP VPNv6
address family is not created.
6.
Enable BGP VPNv6 route
exchange with the specified
peer.
peer
{
group-name
|
ip-address
[
mask-length
] }
enable
By default, BGP does not exchange
BGP VPNv6 routes with any peer.
Configuring BGP VPNv6 route control
BGP VPNv6 route control is configured similarly with BGP route control, except that it is configured in
BGP VPNv6 address family view. For detailed information about BGP route control, see
Layer 3—IP
Routing Configuration Guide.
To configure BGP VPNv6 route control:
Step Command
Remarks
1.
Enter system view.
system-view
N/A
2.
Enter BGP view.
bgp
as-number
N/A
3.
Enter BGP VPNv6 address
family view.
address-family vpnv6
N/A
