12
Authentication
method
Characteristics Application
scenarios
Username and
password
Complex to configure, secure, providing
hierarchical user management
Environments where multiple operators
cooperate to manage the switch
Configuring the basic network settings
An HP 6125 blade switch without any configuration can perform basic data forwarding immediately
after connecting to a network. To implement more forwarding features, you can configure the basic
network settings such as IP address, static route, and VLAN. For more information, see
HP 6125 Blade
Switch Series Configuration Guides
.
Configuration example
Configuring Telnet
# Enter system view.
<Sysname> system-view
# Enable the Telnet server.
[Sysname] telnet server enable
# Enter the user interface view VTY 0.
[Sysname] user-interface vty 0
# Enable password authentication on the user interface.
[Sysname-ui-vty0] authentication-mode password
# Set the password to
hello
.
[Sysname-ui-vty0] set authentication password cipher hello
# Set the user privilege level to 3 so Telnet users accessing VTY 0 can use all commands.
[Sysname-ui-vty0] user privilege level 3
[Sysname-ui-vty0] quit
Configuring the basic network settings
1.
Specify an IP address:
# Create VLAN-interface 1.
[Sysname] interface vlan-interface 1
# Assign an IP address, for example, 192.168.0.1, to VLAN-interface 1.
[Sysname-Vlan-interface1] ip address 192.168.0.1 24
[Sysname-Vlan-interface1] quit
2.
Configure a static route:
# Configure a static route, with the destination IP address 172.16.1.0 and the next hop IP address
192.168.0.2.
[Sysname] ip route-static 172.16.1.0 255.255.255.0 192.168.0.2
3.
Configure a VLAN:
# Create VLAN 10 and enter its view.
[Sysname] vlan 10
[Sysname-vlan10]