HP 5243-2SE Installation And User Manual Download Page 5

Page: 5 / 34

5243-2SE Tape Drive Installation and User’s Guide — 542757-003

iii

What’s New in This Manual

Manual Information

5243-2SE Tape Drive Installation and User’s Guide

Abstract

This guide provides information about installing, operating, and maintaining the 5243-
2SE tape drive on HP NonStop

™ telco servers

. This guide is written for those who

install or maintain the 5243-2SE tape drive.

Product Version

N.A.

Supported Release Version Updates (RVUs)

This guide supports G06.29 and all subsequent G-series RVUs and H06.06 and all
subsequent H-series RVUs until otherwise indicated by its replacement publication.

Document History

New and Changed Information

Indicated support for G-series RVUs.

Part Number

Published

542757-003

July 2006

Part Number

Product Version

Published

542757-002

N.A.

May 2006

542757-003

N.A.

July 2006

Summary of Contents for 5243-2SE



































Search results

Summary of Contents for 5243-2SE

Reviews:

Related manuals for 5243-2SE

Brands by name

Popular brands

HP 5243-2SE, Installation And User Manual

Search results

Summary of Contents for 5243-2SE

Reviews:

Related manuals for 5243-2SE

Brands by name

Popular brands