Quick Start Guide
5
Setup
Follow the steps shown on the setup poster to
set up the computer in your work area. Then
read the topics in this section that describe how
to turn on the computer for the first time, and
finish the registration process.
After registering, install any software programs
that came on CDs or DVDs included in the
computer box (select models only).
Note:
Some programs come preinstalled on the PC.
Before installing a program, check to see if it
already installed on your system.
When you have completed these steps, you
may add any printer, scanner, camera, or other
peripheral equipment you have for your system.
Refer to “Connecting External Components
to Your Computer” on page 57 for connector
information.
Turning On the Computer
for the First Time
After you’ve completed connecting the
components of the HP Pavilion by using the
steps illustrated on the setup poster, you’re
ready to turn on the computer.
First, press the Power button on the monitor.
Then, to turn on the computer, press the
On button on the front of the PC.
Note:
The power supply is pre-set for the country/region
in which you purchased the HP Pavilion. If you
move to another country/region, please make
sure you check its voltage requirements before
plugging your PC into an AC power outlet.
Setting Up the Computer
Summary of Contents for 512n - Pavilion - 128 MB RAM
