4–36
Maintenance and Service Guide
Removal and replacement procedures
Top cover
✎
The top cover spare part kit includes a palm rest, TouchPad and cable, and TouchPad button board and cable.
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
“Battery” on page 4-7
).
5. Remove the following components:
a. Hard drive (see
“Hard drive” on page 4-9
)
b. Memory/wireless module compartment cover (see
“WLAN module” on page 4-12
)
c. Optical drive (see
“Optical drive” on page 4-18
)
d. Keyboard and switch cover (see
“Keyboard and switch cover” on page 4-20
)
e. Palm rest (see
“Palm rest” on page 4-25
)
f. Display assembly (see
“Display assembly” on page 4-27
)
Remove the top cover:
1. Turn the computer upside down, with the front toward you.
2. Remove the four slotted Torx T8M2.5×7.0 screws
1
and the three Phillips PM2.0×3.0 screws
2
that secure the
top cover to the base enclosure.
Description
Spare part number
For use only on computer models equipped with fingerprint reader in black trim (includes fingerprint
reader board and cable)
577216-001
For use only on computer models equipped with fingerprint reader in red trim (includes fingerprint
reader board and cable)
577218-001
For use only on computer models not equipped with fingerprint reader in black trim
577217-001
For use only on computer models not equipped with fingerprint reader in red trim
577219-001