HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual Download Page 118

Page: 118 / 159

Maintenance and Service Guide

7–1

Screw listing

This chapter provides specification and reference information for the screws used in the computer. The screws
listed in this chapter are available in the Screw Kit, spare part number 577213-001.

Phillips PM2.0×6.0 captive screw

Where used:

Two captive screws that secure the hard drive cover to the computer (screws are secured to the cover by C-clips)

Two captive screws that secure the memory/wireless module compartment cover to the computer (screws are

secured to the cover by C-clips)

Color

Quantity

Length Thread Head

diameter

Black

6.0 mm

2.0 mm

5.0 mm

Summary of Contents for 4310s - ProBook - Core 2 Duo 2.1 GHz
































































































































































Search results

Summary of Contents for 4310s - ProBook - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 4310s - ProBook - Core 2 Duo 2.1 GHz

Brands by name

Popular brands

HP 4310s - ProBook - Core 2 Duo 2.1 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 4310s - ProBook - Core 2 Duo 2.1 GHz

Reviews:

Related manuals for 4310s - ProBook - Core 2 Duo 2.1 GHz

Brands by name

Popular brands