manualshive.com logo in svg

HP 4310s - ProBook - Core 2 Duo 2.1 GHz, Maintenance And Service Manual, Page: 73 / 159

Share
Download
HP 4310s - ProBook - Core 2 Duo 2.1 GHz Maintenance And Service Manual Download Page 73

4–28

Maintenance and Service Guide

Removal and replacement procedures

Remove the display assembly:

1. Close the computer.

2. Turn the computer upside down, with the front toward you.

3. Remove the WLAN and WWAN antenna cables 

1

 from the clips 

2

 built into the base enclosure.

4. Turn the computer display-side up, with the front toward you.

5. Open the computer as far as possible.

6. Disconnect the microphone cable 

1

 from the system board.

7. Remove the wireless antenna cables 

2

 from the opening in the top cover.

8. Remove the wireless antenna cables and the microphone cable from the clips 

3

 and routing channel built into 

the top cover.

9. Release the grounding tape 

4

 that covers the wireless antenna cables and microphone cable.

Summary of Contents for 4310s - ProBook - Core 2 Duo 2.1 GHz
































































































































































Reviews:

No comments