HP 409054-003 User Manual Download Page 83

Page: 83 / 105

Upgrading the firmware 83

adapter firmware through the autoupdate feature

" on page

). The servers attached to the interface

adapters must be powered on while upgrading the firmware.

Loading interface adapter firmware individually

NOTE:

This method of loading the interface adapter firmware will always overwrite the current

version of firmware in the interface adapter. HP recommends upgrading your interface

adapters simultaneously ("

Upgrading the interface adapter firmware simultaneously

" on page

), which only upgrades interface adapters needing a new version of firmware.

From the Main dialog box ("

Accessing the Main dialog box

" on page

), click

Commands>Display

Versions.

The

Version dialog box appears.

Click

IA.

The IA Select dialog box appears.

Summary of Contents for 409054-003










































































































Search results

Summary of Contents for 409054-003

Reviews:

Related manuals for 409054-003

Brands by name

Popular brands

HP 409054-003, User Manual

Search results

Summary of Contents for 409054-003

Reviews:

Related manuals for 409054-003

Brands by name

Popular brands