Local port operation 46
3.
Click
OK
to save settings, or click
Clear
to remove all servers from the scan list.
Removing servers from the scan list
1.
From the Scan dialog box ("
Setting up a scan pattern
" on page
44
), click the server to be removed,
double-click a server name or port, or click
Clear
to remove all servers from the scan list.
2.
Click
OK
to save settings.
Activating Scan mode
1.
From the Commands dialog box ("
Managing server tasks using the OSD
" on page
48
), select
Scan
Enable.
2.
Click
X
to close the Commands dialog box. The scan begins as soon as you click the
Scan
button in
the Setup dialog box ("
Managing routine tasks for servers
" on page
31
).
Deactivating Scan mode
If the OSD is open, select a server.
-or-