HP 400E, Operating And Service Manual

Page: 12 / 57

Section II
2-15. INSTRUMENT CASE.
2-16. The 400E/EL can be placed in a rugged, high
impact plastic case (-hp- 11076A). TJ-le instrument
can be operated, stored or carried in thi.; splash-proof
case. A dual purpose tilt stand also serves as a carry­
ing handle. Storage space is located at the rear of the
case and in the fron t lid.
2-17. RACK MOUNTING.
2-18. The Model 400E/EL may be rack mounted by
using an adapter frame (-hp- Part No. 5060-0797).
The idapter frame is a rack frame that accepts any
combination of sub modular units. It can be rack
mounted only. For additional information, address
inquiries to your -hp- Sales and Service Office. ( See
Appendix B for office locations.)
2-19. COMBINATION MOUNTING.
2-20. The Model 400E/EL may be mounted in
combination with other submodular units by using a
Combining Case (-hp- Model 105 1 A or 1052A). The
Combining Case is a full-module unit which accepts
various combinations of submodular units. Being a
full-module unit, the combining case can be bench or
rack mounted and is analogous to any full-module
instrument.
2-21. REPACKAGING FOR SHIPMENT.
2-22. The following paragraphs contain a general
guide for repackaging of the instrument for shipment.
Refer to Paragraph 2-23 if the original container is to
be used; 2-24 if it is not. If you have any questions,
contact YtJur local -hp- Sules and Service Office. (See
Appendix B for office locations.)
2-2
Model 400E/EL
NOTE
If the instrument is to be shipped to Hewlett­
Packard for service or repair, attach a tag to the
instrument identifying the owner and indicating
the service or repair to be accomplished;
include the model number and full serial num­
ber of the instrument. In any correspondence,
identify the instrument by model number,
serial number, and serial number prefix.
2-23. If original container is to be used, proceed as
follows:
a. Place instrument in original container if
available. If original container is not availa­
ble, a suitable container can be purchased
from your nearest -hp- Sales and Service
Office.
b. Ensure that container is well sealed with
strong tape or metal bands.
2-24. If original container is not to be used, proceed
as follows:
a. Wrap instrument in heavy paper or plastic
before placing in an inner container.
b. Place packing material around all sides of
instrument and protect panel face with card­
board strips.
c. Place instrument and inner container in a
heavy carton or wooden box and seal with
strong tape or metal bands.
d. Mark shipping container with "DELICATE
INSTRUMENT," "FRAGILE," etc.