HP 280 G3 Microtower Business, Maintenance And Service Manual

Page: 34 / 116

WLAN module
The WLAN module is located under the drive cage.
1. Prepare the computer for disassembly ( Preparation for disassembly on page 15 ).
2. Remove the access panel ( Access panel on page 16 ).
3. Remove the front bezel ( Front bezel on page 21 ).
4. Remove the optical drive ( Optical drive on page 23 ).
5. Remove the drive cage ( Hard drive on page 25 ).
6. Disconnect the antenna cable from the module (1).
7. Remove the Phillips M2.0×3.0 screw (2), and then pull the module out of the socket (3).
To install the WLAN module, reverse the removal procedures.
26 Chapter 4 Removal and replacement procedures