HP 240 Series, Maintenance And Service Manual

Page: 99 / 162

Power connector cable
Description Spare part number
Power connector cable 685085-001
Before removing the power connector cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 56 ), and then remove the following components:
●
Memory module/wireless module compartment cover (see WLAN module on page 64 )
●
Hard drive (see Hard drive on page 70 )
●
Keyboard (see Keyboard on page 76 )
●
Top cover (see Top cover on page 79 )
To remove the power connector cable:
1. Disconnect the power connector cable (1) from the system board.
2. Release the power connector cable from the clips (2) built into the base enclosure.
3. Remove the tape (3) that secures the power connector cable to the base enclosure.
Component replacement procedures 91