manualshive.com logo in svg

HP 240 G7, Maintenance And Service Manual

Share
Download
HP 240 G7 Maintenance And Service Manual Download Page 58

USB/card reader/power button board

Description

Spare part number

USB/card reader/power button board

L23196-001

USB/card reader/power button board cable

L23186-001

Before removing the USB/card reader/power button board, follow these steps:

1.

Prepare the computer for disassembly (

Preparation for disassembly on page 26

).

2.

Remove the bottom cover (see 

Bottom cover on page 27

).

3.

Remove the battery (see 

Battery on page 29

).

4.

Remove the display (see 

Display assembly on page 51

).

Remove the USB/card reader/power button board:

1.

Disconnect the cable from the ZIF connector on the USB/card reader/power button board (1).

2.

Remove the two Phillips M2.0×3.0 screws (2), and then remove the board from the computer (3).

Reverse this procedure to replace the USB/card reader/power button board.

50

Chapter 5   Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 240 G7






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands