19
video is flashing.
Display is turned off.
Press the display power
button.
USB Type-C cable is not connected to the HP
Desktop Mini
Connect the USB Type-C
cable.
System is in Sleep mode.
Press any key on the
keyboard or move the
mouse to exit Sleep mode.
Image appears
blurred,
indistinct, or too
dark.
Brightness setting is too low.
Open the OSD menu and
select Brightness to adjust
the brightness scale as
needed.
“
Input Signal
Not Found” is
displayed on the
screen.
USB Type-C cable is not connected to the HP
Desktop Mini.
Connect the USB Type-C
cable.
Input Signal Out
of Range is
displayed on
screen.
Video resolution and/or refresh rate are set higher
than what the monitor supports.
Change the settings to a
supported setting.
The monitor is
off, but it did not
seem to enter
into Sleep mode.
The display’s sleep mode is disabled.
Open the OSD menu and
select Power
，
select Auto-
Sleep Mode and then set
auto-sleep to On.
