manualshive.com logo in svg

HP 226824-001 - ProLiant - ML750, Reference Manual, Page: 103 / 138

Share
Download
HP 226824-001 - ProLiant - ML750 Reference Manual Download Page 103

 

 

Server agents  103  

 

 

Log Message: Hot Plug PCI Board Removed. A hot plug PCI adapter has been removed from the 

system. 
SNMP Trap: cpqSiHotPlugSlotBoardRemoved - 2008 in CPQSINFO.MIB 
Symptom: Hot Plug Slot Board Removed. A Hot Plug Slot Board has been removed from the specified 
chassis and slot. 
User Action: None. 
Supporting SNMP Trap Data: 

•

 

sysName 

•

 

cpqHoTrapFlags 

•

 

cpqSiHotPlugSlotChassis 

•

 

cpqSiHotPlugSlotIndex 

Supporting SNMP Trap Description: “Hot Plug Slot Board Removed from Chassis 

[cpqSiHotPlugSlotChassis], Slot [cpqSiHotPlugSlotIndex].” 

NT Event ID: 1141 (Hex)0x44350475 (cpqsvmsg.dll) 

Log Severity: Information (1) 
Log Message: Hot Plug PCI Board Inserted. A hot plug PCI adapter has been inserted into the system. 
SNMP Trap: cpqSiHotPlugSlotBoardInserted - 2009 in CPQSINFO.MIB 
Symptom: Hot Plug Slot Board Inserted. A Hot Plug Slot Board has been inserted into the specified 
chassis and slot. 
User Action: None. 
Supporting SNMP Trap Data: 

•

 

sysName 

•

 

cpqHoTrapFlags 

•

 

cpqSiHotPlugSlotChassis 

•

 

cpqSiHotPlugSlotIndex 

Supporting SNMP Trap Description: “Hot Plug Slot Board Inserted into Chassis 

[cpqSiHotPlugSlotChassis], Slot [cpqSiHotPlugSlotIndex].” 

NT Event ID: 1142 (Hex)0xc4350476 (cpqsvmsg.dll) 

Log Severity: Error (3) 
Log Message: Hot Plug PCI Board Failed. A hot plug PCI adapter has failed to power up. Insure the 

board and all cables are installed correctly. 
SNMP Trap: cpqSiHotPlugSlotPowerUpFailed - 2010 in CPQSINFO.MIB 
Symptom: Hot Plug Slot Board Failed Power-Up. A Hot Plug Slot Board has failed to power up in the 

specified chassis and slot. 
User Action: Be sure the board and all cables are installed correctly, and that the board type and 

revision are the same as the replaced board. 
Supporting SNMP Trap Data: 

•

 

sysName 

•

 

cpqHoTrapFlags 

•

 

cpqSiHotPlugSlotChassis 

Summary of Contents for 226824-001 - ProLiant - ML750











































































































































Reviews:

No comments