HP 19-inch LP1965, Specifications

Page: 11 / 11

1.
2.
3.
Mechanical Mechanical Mechanical Mechanical Dimensions Dimensions Dimensions Dimensions
(H x W x D) Packaged Packaged Packaged Packaged 7.8 x 6.25 x 1.5 in (19.8 x 15.9 x 3.8 cm)
Unpackaged Unpackaged Unpackaged Unpackaged 6.3 x 5.2 x 0.65 in (16 x 13.2 x 1.65 cm)
Weight Weight Weight Weight Packaged Packaged Packaged Packaged 1.1 lb (0.49 kg)
Unpackaged Unpackaged Unpackaged Unpackaged 0.82 lb (0.37 kg)
Additional components Additional components Additional components Additional components Eight 10 mm mounting screws (for attachment to VESA compliant monitor mounts)
Eight 15.5 mm mounting screws (for attachment to HP Thin Client products)
Four 20 mm mounting screws (for attachment to back of select HP flat panel monitor stands)
One Quick Release "locking" screw
Colour Colour Colour Colour Carbonite
Notes Notes Notes Notes No HP monitors allow positioning of a thin client product between a monitor screen and its stand.
The Quick Release device is not to be used between a monitor screen and its stand unless
provided that way from the factory.
Under no circumstances is the Quick Release device intended to be used in an orientation where
the Release/Lock lever is oriented downward.
Supported weight Supported weight Supported weight Supported weight
capacity
capacity capacity capacity
The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) depending
upon the mounting configuration used. Please note this is a total weight limit for all devices mounted, i.e.
the combined weight of the monitor and a second device such as an HP Thin Client cannot exceed 24
pounds. Because mounting surfaces vary widely and the final mounting method and configuration may
vary, mounting fasteners are not supplied (other than the VESA-compliant screws). HP recommends that
you consult with a qualified engineering, architectural or construction professional to determine the
appropriate type and quantity of mounting fasteners required for your application and to ensure that your
mounting solution is properly installed to support applied loads.
© Copyright 2008 Hewlett-Packard Development Company, L.P.
Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation in the U.S. and other countries. Windows
Vista is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. ENERGY
STAR is a registered mark owned by the U.S. government.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
QuickSpecs QuickSpecs QuickSpecs QuickSpecs
HP LP1965 19-inch LCD Monitor HP LP1965 19-inch LCD Monitor HP LP1965 19-inch LCD Monitor HP LP1965 19-inch LCD Monitor
Technical Specifications - HP LCD Monitor Quick Release
DA - 12620 Canada — Version 10 — December 15, 2008 Page 11