background image

 3

Contents

1 Product Overview

Supported Printers, Plotters, and HP All-in-One 

Peripherals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Network Management  . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Network Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

Components and Features . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4
Transmission Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6
Hardware Requirements  . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7
LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-8
Switches (HP JetDirect 300X and 500X). . . . . . . . . . . . . . . . 1-9

2 Hardware Installation

Verifying the Hardware Installation . . . . . . . . . . . . . . . . . . . 2-3

Selecting a Configuration Page Language  . . . . . . . . . . . . 2-3

Resetting to Factory Defaults  . . . . . . . . . . . . . . . . . . . . . . . . 2-4

A Specifications

Physical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1
Power Requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2
Environmental  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Acoustic Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4
Electromagnetic Emissions  . . . . . . . . . . . . . . . . . . . . . . A-4
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

B Regulatory Statements

FCC Statement (U.S.A)  . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
European Community  . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1
Declaration of Conformity  . . . . . . . . . . . . . . . . . . . . . . . . . B-2

Summary of Contents for 170X - JetDirect Print Server































Reviews: