Memory module
Description
Spare part number
8-GB (PC3L, 12800, 1600-MHz)
693374-005
4-GB (PC3L, 12800, 1600-MHz)
691740-005
2-GB (PC3L, 12800, 1600-MHz)
691739-005
Before removing a memory module, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 41
), and then remove the following components:
●
Keyboard (see
Keyboard on page 45
)
●
Top cover (see
Top cover on page 53
)
●
WLAN module (see
WLAN module on page 61
)
●
System board (see
System board on page 66
)
To remove a memory module:
1.
Spread the retaining tabs
(1)
on each side of the memory module slot to release the memory module.
(The memory module tilts up.)
2.
Remove the memory module
(2)
by pulling it away from the slot at an angle.
Reverse this procedure to install a memory module.
76
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Summary of Contents for 15 Notebook PC
