HP 15-fb0 Series, Maintenance And Service Manual, Page: 83 / 89

Table 10-2 Display specifications
Metric U.S.
Active diagonal size 39.6 cm 15.6 in
Resolution 1920 × 1080 (FHD)
Surface treatment Antiglare
Brightness 250 nits (45% NTSC)
300 nits (100% sRGB)
Viewing angle UWVA
SVA
Backlight WLED
Display panel interface eDP
Solid-state drive specifications
This section provides specifications for your solid-state drives.
Table 10-3 Solid-state drive specifications
256 GB* 512 GB* 1 TB*
Dimensions
Height 1.0 mm 1.0 mm 1.0 mm
Length 50.8 mm 50.8 mm 50.8 mm
Width 28.9 mm 28.9 mm 28.9 mm
Weight < 10 g < 10 g < 10 g
Interface type PCIe PCIe PCIe
Ready time, maximum (to not busy) 1.0 ms < 1.0 ms 1.0 ms
Access times, logical 0.1 ms 0.1 ms 0.1 ms
Transfer rate
Sequential read up to 2150 MB/s up to 2150 MB/s up to 2150 MB/s
Random read Up to 300,000 IOPs Up to 300,000 IOPs Up to 300,000 IOPs
Sequential write up to 1550 MB/s up to 1550 MB/s up to 1550 MB/s
Random write Up to 100,000 IOPs Up to 100,000 IOPs Up to 100,000 IOPs
Total logical sectors 468,883,296 1,000,215,216 1,500,336,388
Operating temperature 0°C to 70°C (32°F to 158°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less.
Actual drive specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
Solid-state drive specifications 77