manualshive.com logo in svg

HP 15-fb0 Series, Maintenance And Service Manual, Page: 52 / 89

Share
Download
HP 15-fb0 Series Maintenance And Service Manual Download Page 52

4.

Remove the fan assembly from the computer (4).

To install the fan assembly, reverse this procedure.

Power connector cable

To remove the power connector cable, use this procedure and illustration.

Table 6-6

Power connector cable description and part number

Description

Spare part number

Power connector cable

N13314-001

Before removing the power connector cable, follow these steps:

1.

Prepare the computer for disassembly (see 

Preparation for disassembly on page 36

).

2.

Remove the bottom cover (see 

Bottom cover on page 36

).

3.

Disconnect the battery cable from the system board (see 

Battery on page 38

).

Remove the power connector cable:

1.

Remove the Phillips M2.0 × 4.0 screws (1) that secures the bracket, and then remove the bracket (2).

2.

Disconnect the cable from the system board (3).

46

Chapter 6  Removal and replacement procedures for authorized service provider parts

Summary of Contents for 15-fb0 Series


























































































Reviews:

No comments