Installing the Media Reader 13.3-cm (5.25-inch) Adapter
Kit
The Media Card Reader can be installed in a 8.9-cm (3.5-inch) or 13.3-cm (5.25-inch) computer drive
bay. If installing the 8.9-cm (3.5-inch) media card reader into a 13.3-cm (5.25-inch) drive bay, you
must first install the 13.3-cm (5.25-inch) accessory kit to the reader.
1.
Remove the four screws (two on each side) from the media card reader.
Figure 1-1
Removing screws from Media Card Reader
2.
Assemble the rails and bezel and attach to the media card reader with the four screws removed
in step 1.
Figure 1-2
Attaching Rails and Bezel
2
Chapter 1 Product Features
Summary of Contents for 14-in-1 Media Card Reader
Page 1: ...HP 14 in 1 Media Card Reader User Guide ...
Page 4: ...iv About This Guide ...
Page 6: ...vi ...
