2.
Install the glides onto the computer by inserting the tabs into the side of the computer and then sliding
the glide forward (1). Then attach the rear of the glides with screws (2).
3.
Slide the computer into the rack, being sure to place the glides into the rails.
4.
Secure the computer in the rack by turning the rack pull screws clockwise until tight.
5.
Connect the power cords to the computer.
10
Chapter 3 Setting up the rack rail (select products only) and computer
Summary of Contents for 11Q98EA#ABU
Page 4: ...iv Warning notices ...
Page 6: ...vi About this guide ...
Page 10: ...HP links 37 Contacting support 37 Index 38 x ...
