HP Autozubehor 75310, Owner'S Manual

Page: 48 / 101

OBD2 CODE READER
21
OWNER’S MANUAL
emissions inspection.
“OK” -- Indicates that a particular monitor being checked has completed
its diagnostic testing.
“INC” -- Indicates that a particular monitor being checked has not
completed its diagnostic testing.
“N/A” -- The monitor is not supported on that vehicle.
1) Use SCROLL button to select I/M Readiness from Diagnostic Menu and
press ENTER/EXIT.
Diagnostic Menu
====================
8/8
5) View Freeze Frame
6) I/M Readiness
7) Vehicle Info.
8) Exit
If more than one module is detected, you will be prompted to select a module before
test.
Control Module
====================
1/3
Engine
Module $A4
Exit
Use SCROLL button to select a module and press ENTER/EXIT button.
2) Wait a few seconds while the code reader validates the PID MAP.
…… I/M Readiness…
=======================
Reading PID.01
- Please Wait -
3) If the vehicle supports both types of tests, then both types shows on the
screen for selection.
… …I/M Readiness…
====================1/3
Since DTCs Cleared
This Drive Cycle
Exit