２
Precautions
These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows :
Warning
…
Notice when incorrect handling could cause the user's death or serious
injury.
Caution
…
Notice when incorrect handling could cause injury to the user or material
damage.
Even if the instructions do not have
Caution
mark, there are some possibilities for
a
Warning and caution symbols
1. Use with the voltage described in the specifications of this instruction manual.
Otherwise, this could cause a fire or malfunction.
2. Use only under combination of these station and iron.
3. Always connect to grounded line. Otherwise, this could cause not only incomplete
electrostatic discharging measures but also irregular temperature control to the tip.
4. Do not handle energized components. This could cause a shock since the grip of
the iron is made of conductive material.
5. Do not modify this product.
6. The tip becomes extremely hot. Never make the following things come closer to the
hot area.
・
Human bodies such as hand, face and so on.
・
Highly volatile chemicals, such as alcohol and paint.
Warning
1. Place the station and iron stand on a level and stable surface without vibration.
2. Store in dry surroundings after use.
3. Do not stretch or tightly fold the internal cord or the power cord so as to avoid
damaging these cords. This could cause a short circuit and a fire.
4. Scrub the oxides of the solder, flux on the tip with the sponge of the iron stand. If you
remove the solder by swinging the iron around or by striking it on the edge of a desk
or something, the heater breaks and your body get injured.
Always water the sponge of the iron stand during use.
Caution
